Huawei Certified ICT Professional (HCIP) Practice Test

These questions are part of the practice quiz. Start practicing

• Which of the following statements about DR/BDR are regarded as false?
• Is the traditional tail drop method associated with global TCP synchronization during packet loss?
• Which network type is additionally supported in IS-IS besides P2P?
• Which of the following statements about BGP community filters is incorrect?
• How does an edge port behave in RSTP?
• Can the import-route limit command restrict the number of external routes in an OSPF process?
• How does OSPF prevent inter-area routing loops?
• Regarding BGP configuration authentication, which is true?
• If an alarm j°BGP/2/BACKWARD is generated during BGP configuration, which of the following statements regarding the cause of this alarm is false?
• Compared to a three-layer network architecture, which statement is true about a two-layer architecture?
• What is the role of eSight in network operations and maintenance?
• What is a correct statement about Spanning Tree Protocol (STP)?
• When two routers exchange LSDB information, what forms first?
• If a fault cannot be rectified quickly on a complex network but immediate restoration is required, what action should be taken?
• Which configuration is essential for proper communication in a multi-area OSPF environment?
• Which issue can Multi-Service Transport Protocol (MSTP) help resolve in a single spanning tree network?
• What is one impact of using a Guest VLAN?
• Which protocol can operate in both dense mode (DM) and sparse mode (SM)?
• What is the role of a Label Edge Router (LER) in MPLS?
• Are labels generated only for direct routes of devices running MPLS in an IP domain?
• Which type of authorization is typically required for risky operations?
• Which statement regarding the LSA header information in AS-External LSA is incorrect?
• When hosts and servers in the same zone communicate with each other, NAT is required.
• How does a DHCP client identify available servers?
• Which technology can provide high availability in a network environment?
• What is a fundamental difference between Type 1 and Type 2 external routes in OSPF?
• What is one of the main challenges when implementing MPLS in a network?
• What causes jitter to occur in data packets?
• Which DHCP packet does a client use to extend its IP address lease when 87.5% of the lease time has expired?
• What is one objective of BFD packets?
• What is true about flow mirroring?
• In BGP, what is required for sending an Update message after an export route policy change?
• Which statement regarding PIM-DM is true?
• What is the default Hello interval of a DIS in a broadcast network?
• What does the pop action in MPLS signify?
• What distinguishes RSTP from STP regarding port state definitions?
• Which DHCP address allocation mode is suitable for temporary network access?
• What is the typical time frame for reviewing and finalizing a risky operation solution before implementation?
• Which statement regarding Router-LSA connection types is false?
• Which command effectively monitors traffic flow in networking devices?
• In the context of QoS, what is often a cause of packet loss?
• In a MAC address spoofing attack, what error can occur regarding the switch's learning process?
• Which command can display route calculation statistics in an OSPF process?
• Which QoS technology is often used for classification based on packet information?
• In VRP, how does BGP handle route summarization by default?
• What is the primary purpose of a firewall in network security?
• Which statement is true regarding packet handling at a firewall after a 3-way handshake?
• Which of the following statements is NOT a limitation of traditional networks?
• Which of the following statements regarding the IntServ model is false?
• What command is used to configure the listening address of the SDN controller?
• In DU label advertisement mode with liberal label retention mode, how does the device handle labels from LDP peers?
• Is it true that only MD5 authentication is supported between BGP peers?
• Is VXLAN irrelevant to SDN technology?
• Which of the following protocols is typically used for reservation and resource allocation?
• Which BGP attribute is considered a unique attribute in Huawei's implementation?
• What happens if the two ends of a static LACP configuration have the same LACP system priority?
• Which method improves Internet egress reliability for enterprises?
• Regarding any-source multicast (ASM) and source-specific multicast (SSM) models, which statements are true?
• What does policy-based routing allow a router to do?
• What are the basic work process steps of SDN?
• Which packets are transmitted in unicast mode during the IP address application by the DHCP client?
• What is the multicast destination address of VRRP packets?
• What is the primary function of IGMP in network communications?
• Which LSA packet carries master/slave relationship information?
• Which approach is typically used for centralized data collection in networking?
• Which of the following is a true statement regarding IS-IS compared to OSPF?
• Which of the following BGP attributes are considered well-known mandatory attributes?
• Which command is used to configure the VRRP preemption delay?
• In a non-broadcast network, what modes does OSPF operate in?
• What type of network device typically acts as a designated port in RSTP?
• What is the essence of SDN?
• On a network operating with STP, how many types of RSTP BPDUs are defined?
• What is the primary use of VLANs (Virtual Local Area Networks)?
• Which formula is used to calculate availability?
• In which state are DR and BDR elected in an OSPF broadcast network?
• What type of environment most benefits from using a proxy firewall?
• What is true about the IP address statically bound in a DHCP server?
• Do NFV and SDN depend on each other?
• Which statement about virtual links is false?
• Which of the following are characteristics of a High Availability (HA) network?
• In a complex network environment, what is the first concern for troubleshooting?
• What are the key features of SDN network architecture?
• What type of relationship does the Hello packet define in OSPF?
• Which statements regarding LACP are true?
• What is true regarding the BGP protocol?
• What is a major advantage of OSPF over EIGRP?
• Which of the following configurations is essential for OSPF routing functionality?
• What does VLSM help to improve in IP address allocation?
• What types of traffic can be mirrored through port mirroring?
• What does IGMP do in multicast networks?
• What characteristic distinguishes OSPF's operation in non-broadcast networks?
• Which statement confirms the operability of RSVP in IntServ?
• Which statements regarding the physical topology monitoring function of eSight are TRUE?
• Which option must be enabled in a DHCP server for it to function properly?
• Which statement about LACP is correct?
• Which statement about static LACP mode is true?
• What is the implication when a device fault occurs after running properly for 24 hours post-inspection?
• What is the primary purpose of the Network Address Translation (NAT) function?
• In service provider networks, what does MPLS primarily offer?
• In port isolation, which statement is false?
• Which types of messages are supported by BGP?
• Which command allows filtering of LSAs in a P2MP network?
• What is the default sending interval of BFD packets?
• Which statement regarding port isolation on Huawei switches is false?
• What is the main function of the PIM-SM protocol?
• Which statement regarding MUX VLAN is false?
• What happens when the peer default-mute-advertise command is executed on a BGP router?
• What is the result of port isolation on a switch?
• Which statement regarding AS_Path is false?
• Which technologies are part of congestion avoidance?
• Is it true that link aggregation can work in both manual load balancing mode and static LACP mode?
• Which of the following traffic is transmitted in the outbound direction for interzone packet filtering?
• Which of the following addresses is a private IP address?
• Which command can be used to avoid BGP suboptimal routing?
• In an MPLS network, what is true regarding label distribution control mode?
• Which of the following statements about the OSPF protocol is true?
• In a carrier's MPLS VPN network, what are the outer and inner labels when a client on PE2 accesses a route converted by PE1?
• When configuring source NAT with no-pat, which statement is true?
• Which technology improves network efficiency by prioritizing types of traffic?
• How does an IGMPv2 router recognize group membership on a local segment?
• Which information of labels is used for simple traffic classification?
• Which statement is correct about network device addressing?
• Which of the following is not an assumption of PIM-DM?
• Which BGP attributes can be used in apply clauses of a route-policy?
• Which contents are typically included in a project implementation solution?
• Which statement about Huawei eSight network management software is false?
• How is CAPEX defined?
• What is a crucial aspect of link aggregation?
• Which statement about OSPF external route types is false?
• What are the two types of matching order for ACL?
• What is true about the functionality of IGMPv3?
• What is an inaccurate statement regarding port isolation?
• What does the liberal mode of label retention in LSR primarily do?
• Do BGP routers establish peer relationships using UDP?
• Which of the following methods is NOT a way to collect data?
• Which of the following describes the role of VRRP?
• Which roles are valid for OSPF intra-area or inter-area routers?
• What is one benefit of using VLANs in a network?
• Which one of the following statements regarding totally stub areas in OSPF is true?
• What is the purpose of multicast addresses?
• What does the acronym VLAN stand for in networking?
• Which statement regarding the summary automatic command and BGP route summarization is false?
• Which of the following statements regarding join member interfaces are false when link aggregation works in manual mode?
• Does the AS_Path attribute take effect within an AS?
• Can two Level-1 routers in different areas establish a neighbor relationship?
• Which of the following statements regarding OSPF multi-instance is false?
• What is a false statement regarding the use of two-layer labels in MPLS VPN?
• Which protocol’s packets cannot be matched with the status table due to being connectionless?
• In static LACP mode, how is the Active side selected?
• What is the primary purpose of congestion management technologies in network scheduling?
• What cause of packet loss is typically associated with full queues?
• Which statement about link aggregation is false?
• What is the correct Origin attribute priority order according to BGP route selection rules?
• Which statement about the MPLS forwarding process is false?
• What feature is exclusive to the professional edition of Huawei's eSight?
• Before performing a software upgrade on Huawei datacom products, what is the required action?
• What indicates that a fault occurred on a card after 24 hours of proper functioning?
• Which actions are part of the full lifecycle guest management of the Agile Controller?
• At which layer does a packet filtering firewall check data packets?
• How many bits make up an MPLS label field?
• In what scenario is the proxy firewall most beneficial?
• Which command enables BFD association with OSPF across all interfaces?
• Are multiple BGP processes able to be configured on the same router?
• What is a characteristic of the LSR after TCP connections are established in LDP?
• When two routers establish a logical BGP peer relationship over multiple links, is the use of the peer connect-interface command mandatory?
• In network optimization, reducing operational costs can be achieved through which of the following?
• In MSTP, does each MSTI calculate an independent spanning tree using the RSTP algorithm?
• Which of the following are transfer-to-maintenance trainings after project delivery?
• Which counters are appropriate indicators of network QoS in enterprise services?
• What characterizes single-packet attacks?
• What is a characteristic of RSTP that allows for faster convergence compared to STP?
• In a BGP setup, what indicates that two routers are IBGP peers?
• Which command is used to check the memory usage of a device?
• Which of these delays can influence jitter?
• In port mirroring, data must be collected in which manner for reliability?
• What feature allows device discovery by specified product model in network management software?
• Which function can both a firewall and a router perform in a network?
• Which device is located at the outermost part of an enterprise network?
• What technique can be used to improve route convergence in networks using RSTP?
• If greater-equal is specified but less-equal is not in IP prefix configuration, what is the IP prefix range?
• How is the OSPF interface cost calculated by default?
• Which of the following can a DHCP server use for address allocation?
• Which packet information can be used for complex traffic classification?
• What type of switch is recommended for a network with numerous IP phones and WLAN APs?
• Which of the following best describes SD-WAN technology?
• Which of the following correctly describes the service quality expectations for optimized networks?
• What is an advantage of using link aggregation in networking?
• Which of the following is NOT a disadvantage of the traditional congestion avoidance mechanism (tail drop)?
• RSTP provides different functions in different scenarios. Which of the following statements is false?
• What is a highlight of the Service Chain component of the Agile Controller?
• In a Huawei network, which command is used to track an ISIS session for VRRP?
• Which type of packets are LSA Update packets sent in OSPF?
• What is the main characteristic of a Fat AP compared to a Fit AP?
• Which of the following configurations ensures redundancy in network topologies?
• Which statement about the BGP network command is false?
• What is a primary function of BGP in network routing?
• Which statement regarding ABR is false?
• On the USG series firewall, what is the security level assigned to the DMZ?
• What is the most unlikely cause for a VRRP group experiencing a two-master fault?
• What is the function of the DHCP Offer packet?
• Which of the following is not a type of overlay VPN technology?
• What does the not-advertise parameter in the asbr-summary command do in OSPF?
• Which aspects should be considered during preliminary analysis of a migration project?
• In RSTP, what happens to the edge port configured to operate in protection state when it receives BPDUs?
• How does the policy-based route facilitate traffic management?
• What type of attack involves sending ICMP Request packets to a broadcast address?
• What does the alarm j°SPFZZ/IFAUTFAIL indicate when a packet is received?
• Which roles are associated with port mirroring in networking?
• Which of the following is a difference between IGMP versions?
• What task is performed during the cause list phase in network troubleshooting?
• Is communication with other involved parties important during the migration kick-off meeting?
• What action should be taken if a network fault persists despite attempts to rectify it?
• Which of the following statements about packet loss is correct?
• What is the role of BPDU in MSTP?
• Does the SDN controller optimize network throughput by adjusting traffic paths based on network status?
• Which command is used to configure the association between VRRP and a physical interface?
• Is using default routes between routers more resource-intensive than complete routing tables?
• What is the range of basic ACL numbers in the ACL configuration command?
• What sequence of actions does a DHCP client take when re-accessing a network?
• Which statement about VPN instances is false?
• What is the main advantage of using route-policies in BGP?
• What happens when a BGP router receives a route with an unreachable next hop?
• What limitation of traditional VPN technology does MPLS VPN address?
• Can an AS boundary router be an internal router or ABR and must it belong to the backbone area?
• How are two BGP load balancing routes with the same attributes advertised to neighbors?
• Which of the following statements about LDP label distribution control modes is incorrect?
• Which command is necessary to enable IS-IS on an interface?
• What does PoE enable a switch to do?
• Is it true that BFD does not need to be used with other quick failure detection technologies?
• Which operation should be prioritized for troubleshooting Telnet login failure?
• Which command can leak routes of Level-2 areas into Level-1 areas?
• Which layer does DHCP typically operate at?
• Which statement regarding BGP route selection rules is true?
• What is typically the function of an aging timer in routing protocols?
• Which protocol is commonly used for routing in large networks?
• Which statements about a route-policy are accurate?
• Which slot type is not available in the AR series routers?
• What event marks the end of the network planning stage?
• Which statement regarding the IP address lease provided by a DHCP server is false?
• What does the Type 1 external route cost consist of?
• Can VXLAN users access the Internet through VXLAN interfaces?
• What happens to the quality of services not prioritized when QoS is implemented?
• Which statement about multicast protocols is false?
• What is the impact of an edge port on network connectivity in RSTP?
• Which aspect of the Agile Controller enhances service management?
• When troubleshooting an EBGP peer relationship, what condition must be met regarding the hop count for loopback interfaces?
• In a multicast network environment, how do an IGMPv1 host and an IGMPv2 router interact on the same LAN?
• Which of the following statements regarding two-layer MPLS labels is false?
• Which statement about BGP Update messages is false?
• Which BGP feature enhances routing efficiency?
• Which of the following subsystems are involved in building cabling?
• What is the default priority of a device in a VRRP group?
• What symptoms may be caused by a network loop due to Ethernet's broadcast support?
• In IGMPv2, what happens if a router does not receive Report messages?
• What is the function of the Agile Controller in network resource management?
• If the number of checked goods differs from the packing list, what should you do?
• Which LSA packet carries master/slave relationship information?
• What is the default protocol that switches run?
• Which statement about different types of firewalls is not true?
• Which of the following statements regarding OSPF special areas is false?
• Which statement regarding port roles in MSTP is false?
• In which mode is label distribution done through ordered label control?
• Which protocol is specifically designed to quickly detect network link faults?
• In which phase of the sutured network troubleshooting process is the fault reported to other departments?
• Which statement about MPLS label encapsulation format is true?
• According to BGP route selection rules, which type of routes is preferred?
• How does the S9700 compare to previous models?
• What does QoS prioritize in network traffic?
• What mechanism does IS-IS use for neighbor relationship establishment reliability?
• What advantage does the S9700 switch have over the 57700?
• Which of the following represents difficulties in migration?
• Which of the following statements regarding the firewall zone security level is false?
• What can impact the service when multiple BFD sessions are monitored by VRRP?
• Which of the following statements regarding BGP Compatibility is true?
• What capability does traffic shaping provide compared to traffic policing?
• Which of the following causes for VRRP group flapping is the most unlikely?
• What configuration method can prevent man-in-the-middle attacks?
• Which of the following statements regarding software and configuration backup is true?
• Which statements about OSPF packets are true?
• What defines the primary role of an ABR in OSPF?
• In BGP, the Origin attribute of routes imported using the import-route command is what?
• How many types of VPN models are commonly classified?
• What is NOT performed in the joint software commissioning?
• Which statement regarding Huawei eSight network management software is false?
• What does congestion in a network indicate?
• Which statement about Network Address and Port Translation (NAPT) is true?
• Which port states are defined by RSTP?
• Which statement regarding the OSPF protocol is FALSE?
• When a Huawei router serves as an SSH client and fails to log in to another Huawei router, which of the following is the least likely cause for the server fault?
• Why is fault recovery important in a High Availability network?
• What is true about the process of migrating in a network?
• How will a BGP router process a route with an unreachable next hop?
• How does multicast technology benefit data transmission?
• Which of the following is NOT a function of a VLRP group?
• After PPP Multilink is configured, how is data allocated to member links?
• In RSTP, which port type functions as a backup?
• What type of attacks can DHCP snooping help prevent?
• What is the function of the detail-suppressed keyword in the aggregate command?
• In an IS-IS broadcast network, which multicast MAC address is used by a Level-2 router for IS-IS Hello packets?
• What benefit does the principal and subordinate VLAN becoming the same provide in a MUX VLAN?
• Which improvement is not part of RSTP compared to STP?
• In the context of a P2MP network, which statement is true?
• If Router Priority is set to 0, what is its role in OSPF?
• What is the primary goal of structured network troubleshooting?
• Which of the following statements regarding BGP is false?
• Which of the following statements about well-known discretionary attributes in BGP is correct?
• By default, how does VRRP function on a Huawei AR router?
• For interzone packet filtering, which traffic is not transmitted in the outbound direction?
• What device discovery modes are supported by Huawei eSight network management software?
• In a route-policy, which of the following BGP attributes can be used in if-match clauses?
• What does the acronym BPDUs stand for in network terminology?
• Which traffic type can obtain bandwidth guarantee before congestion occurs?
• Which of the following statements about MPLS forwarding mechanisms are true?
• What is a VPN instance also known as?
• Which of the following is a lower-layer physical device in the NFV framework?
• What is the primary role of multicast MAC addresses in routing protocols?
• Which of the following statements about BPDU is true?
• Which action is NOT part of BGP routing policy implementation?
• What determines the sequence in which a router selects a route among multiple options?
• What takes precedence when both area and interface authentication are configured in OSPF?
• Which LSPs are established in Downstream Unsolicited (DU) label advertisement mode?
• Which items can be used to remind customers of information security?
• The main difference between an OSPF NSSA area and a stub area is?
• What features must a risky operation solution possess?
• What type of network does OSPF typically not recognize by default?
• Which statement about ASBR-Summary-LSA is false?
• What is the impact of a high memory usage percentage in networking devices?
• Which configuration can enable indirectly connected EBGP peers to establish a connection normally?
• Which scenario does not utilize the guest access management function of the Agile Controller?
• Which protocol primarily manages multicast group membership?
• Which attribute is not used to define access control list rules?
• What happens when the topology of a network running RSTP changes?
• Which option is not a valid statement about OSPF network segments?
• During MSTP troubleshooting, which statement is false regarding the display current-configuration command?
• Which firewall type has the highest forwarding efficiency for non-first packet data flows?
• What does the selection of a secondary optimal path in MSTP contribute to?
• Which characteristic defines the Fat AP?
• Which statement about multicast is false?
• Which configuration modes are supported by VXLAN?
• In a Layer 2 switching network, can a firewall in transparent mode filter out Layer 3 information in data packets?
• Which of the following statements regarding a multicast distribution tree is false?
• Which statement is true regarding the stateful inspection firewall?
• Which statement about DHCP server lease is true?
• Can the interface IP address and the VRRP virtual IP address be the same?
• What must a BGP Speaker do to transmit routing information to other IBGP peers?
• In an OSPF routing domain, how many routers must be specified as DR and BDR in a broadcast network?
• Which environment is recommended for deploying managed telecommunications services?
• Which attributes can be used in advanced ACL rules to describe IP packets?
• What is the first step required when configuring a DHCP server?
• Which of the following is a benefit of using subnetting in networks?
• What does E-Sight single-server mode restrict regarding user login?
• Fast detection technologies can rapidly detect communication faults between neighboring devices.
• Which device in MPLS is responsible for adding or deleting labels from packets?
• Which aspect does NOT contribute to network congestion issues?
• What message will be identified as incorrect during negotiation in the Error Code of the Notification message when BGP peer settings are inconsistent?
• What happens when a BGP router receives a valid route with an unreachable next hop?
• Which aspect should be considered for migration risk assessment?
• Which statement is true regarding SDN and NFV?
• Which of the following is not considered an external risk to a project?
• Which of the following statements regarding BGP route advertisement are false?
• Which statement regarding VRRP is false?
• Which troubleshooting method is not based on the TCP/IP reference model?
• During which phase of project management is risk assessment typically conducted?
• What happens when the Hold Time parameter between BGP peers is set to 0?
• What type of access control is ensured through access security optimization?
• Which statement about MUX VLANs is accurate?
• Which statements about BGP are true?
• In the Agile Controller's access control scenario, which statement regarding the RADIUS server and client is true?
• Which of the following tools is NOT used for route filtering?
• Which VLAN assignment method is least commonly used in network design?
• What is the incorrect characteristic of IBGP peers?
• Which attribute in BGP represents a route's origin information?
• Which statement about delay and jitter is true?
• What does the value "Online" indicate when using the display device command?
• What are the differences between the DiffServ and IntServ models?
• What does the term 'LSP' stand for in MPLS networks?
• Which of the following tasks need to be completed during the planning stage of a project?
• What effect does a small interval for sending VRRP packets have on the backup device?
• What is a common reason for configuring multicast in a network?
• Which command is used to apply a traffic policy to an interface on an AR router?
• Which technique does traffic shaping use to manage excess traffic?
• In a stateful inspection firewall, how are sessions monitored?
• What is a false statement regarding PIM-SM Hello packets?
• Which topology can provide redundancy in network design?
• What is a key characteristic of RSTP compared to STP?
• Which items on a packing list need to be confirmed during unpacking?
• What are the three aspects used to determine the project scope?
• Which statement about MPLS is false?
• Which function does an ABR perform in a network?
• What type of information can be learned from the industry background of a project?
• What happens when a root port fails in RSTP?
• Which of the following statements regarding OSPF stub area is true?
• Which are true regarding IP address allocation?
• What concept does not belong to the MUX VLAN?
• Which of the following factors makes NAPT appealing for enterprises?
• Which security feature defends against bogus DHCP server attacks?
• Which statement regarding LDP Discovery messages is true?
• Which of the following Hello packets are used in IS-IS?
• Which items can be used as filtering conditions for historical alarm queries?
• Which are the two subfields in the port identifier of the uplink port on a non-root switch in RSTP?
• Which zone on the USC series firewall can be deleted by the administrator?
• Which of the following statements about the default status of switches is accurate?
• In OSPF, do DR and BDR elected in a broadcast network listen on both 224.0.0.6 and 224.0.0.5?
• Is the master/slave relationship of OSPF neighbors negotiated using DD packets?
• In a Diff Serve network, what is the goal of the EF classification?
• Which of the following statements about VRRP fast switchover is incorrect?
• In a network running RSTP where some devices use STP, how are topology changes notified?
• In static LACP mode, which statement is false regarding the interface priority?
• What is the broadcast domain of VXLAN commonly referred to as?
• Which function does the MPLS forwarding equivalence class (FEC) perform?
• Which VPN technology allows employees to connect securely to an enterprise intranet remotely?
• When is a route with a shorter AS_Path preferred in BGP?
• How does OSPF handle bandwidth during cost calculation?
• Which BGP attribute can define a set of destination addresses with public characteristics?
• Which tool is typically employed to filter routing information in networking?
• Which tool is often used to analyze network traffic for optimization purposes?
• What could lead to the failure of establishing BGP peer relationships?
• During BFD session establishment between devices, which state is not involved?
• What is a characteristic of an access control list (ACL) in route selection?
• What is a major reason BGP is considered an enhanced distance-vector protocol?
• What is the role of the S field in an MPLS label?
• In BGP, which of the following allows routers to determine whether to carry specific attributes?
• Which networks are involved during the construction of a large enterprise network?
• Which command is used to enable association between BFD and OSPF on all interfaces?
• Which of the following statements regarding the OSPF feature is false?
• Which of the following statements regarding VRRP is false?
• What can help avoid information leakage on intra-nets?
• Which regulation does not apply to onsite behavior during the service process?
• Does IGMPv3 support IGMPv1 General Query, IGMPv2 Group-Specific Query, and IGMPv3 Source/Group-Specific Query?
• Which of the following statements regarding BGP route advertisement rules are true?
• In MPLS packet processing, what is the role of the peer PE after receiving a packet?
• What does the acronym RSTP stand for in networking?
• Which of the following attacks is not classified as a network layer attack?
• What attacks can DHCP snooping help defend against?
• What is one of the purposes of access security optimization?
• What does a route-policy accomplish in network routing?
• Which protocol allows for the distribution of labels in an MPLS network?
• Which of the following is a drawback of traditional STP?
• Which type of LSA packet contains complete LSA information?
• Which route selection tools can also be used by other routing protocols besides BGP?
• What is the expected benefit of implementing SDN in a network?
• Which series of Huawei's campus switches is suitable for selecting Layer 3 100M switches?
• Which command is used to check the fan status of a device?
• What does a network experiencing congestion primarily suffer from?
• Which of the following describes the responsibilities of a PE in MPLS VPN?
• What method is used to control access for internal employees and guests in the Agile Controller?